1,The first tyre surface dust wipe clean, peer wiping a thin layer of oil or lubricant.
2, Clean tyre coupling hole, wiping oil or lubricant.
3, the coupling into the installation shaft; such as the hole tight, pay attention to avoid hammers or hard metal hit the installation.
4, positioning is completed, first by diagonal direction, with a torque wrench (specified tightening torque 1/4) gently tighten the screws.
5, increase the intensity (specify the tightening torque of 1/2) Repeat the fourth step action.
6, according to the provisions of the tightening torque to tighten the tightening fixed.
7, and finally, tighten the fixing screws in the circumferential direction.
8, when disassembling, please place the device completely stopped; in turn release the locking screw.